Accelerated Aging Chamber

Product Details:

Lenpure Air ventilation Aging Test Chamber It is suitable for the thermal endurance test of electrical insulating materials and the air exchange aging test of electronic parts and components as well as plastic products. Test and judge the adaptability of products when stored and used in high-temperature environmental conditions; measure the properties of test specimens upon aging in high-temperature and barometric air and compare the results with that of the un-aged test specimens.

• 100L to 1000L capacity optional and customized size available
• Wide temperature range
• Small temperature spread–even when loaded
• Incorporated with protection module for safety voltage
• Heavy-duty flooring to support vehicles
• All circuits fused or circuit breaker protected
• Incandescent interior lighting
• Painted galvanized steel exterior for long life
• Tri-color Indicator and EMO (Emergency-off Switch) available

• Apply to: High Temperature Aging Test
• Cable, Electronic parts, Plastic, Rubber, metal

• ASTM D 1171, ASTM D 1149
• DIN/EN 27326, DIN 53509
• UL-1581
• JB/T 7444-94

This test equipment comply with above test standards (but not limited to)

Product Details:

190L or Customized Air-cooled Xenon Lamp Aging Test Chamber adopts xenon arc-lamp which can realize full wavelength of natural sunlight to the most extent, so that to reappear destructive light radiation of different environment. Also can simulate rainfall, high & low temperature and moisture of natural environment, so that it can perform extremely realistic accelerated weathering test on material and coating layer.

Features:

• High performance and quiet operation (20~ 70 dBa)
• Touch-screen controller, user-friendly
• Import Q-Lab air-cooled Full spectrum xenon lamp, more economical, more efficient and easier to maintain. Lamp life of 1800 hours
• The flat sample mounting tray can accommodate different shapes and sizes of samples, including 3D parts. There are a variety of sample stents to choose from
• The irradiance control system continuously monitors and controls the output of the light, which ensures accurate exposure and repeatable test results
• Allows the user to simultaneously control and monitor relative humidity, blackboard temperature and air temperature in the box
• All circuits fused or circuit breaker protected, overload protection
• All wiring numbered or color coded
• Tri-color Indicator and EMO (Emergency-off Switch) available

Application:

• Apply to: Accelerate Aging Test,Xenon Lamp Test
• Paint, Plastic, Rubber, Fabric, Cable, Glass etc

• IEC 68-2 / IEC 60068-2
• ISO 4892-2 / ISO 3917 / ISO 11341 / ISO 105-B02/06 / ISO4665-3
• JISK 6781
• UL 62275
• This test equipment comply with above test standards (but not limited to)

Product Details:

Lenpure UV-Lamp Weathering Test Chamber Take fluorescent UV lamp as light source to simulate the UV irradiation in natural light and condensation to conduct accelerated weathering test to the materials. It can simulate the UV, rain, high temperature, high humidity, condensate, darkness and other environmental conditions in natural climate and combine them in a circle, and carry out these circles automatically.

• Black Panel Temperature (BPT) Control
• Touch-screen controller, user-friendly
• With irradiance monitor function
• Import Q-Lab air-cooled UV lamp, more economical, more efficient and easier to maintain. Lamp life of 1800 hours
• Door Safety and Over-temperature Shutoff
• The irradiance control system continuously monitors and controls the output of the light, which ensures accurate exposure and repeatable test results
• Allows the user to simultaneously control and monitor relative humidity, blackboard temperature and air temperature in the box
• All circuits fused or circuit breaker protected, overload protection
• CE Compliance and UL & CSA Certified
• Tri-color Indicator and EMO (Emergency-off Switch) available

• Apply to: UV Aging Test
• Coating, Plastic, Hardware, Textile, Wooden Floor, Ttoy

• ASTM D4329, ASTM G151
• ISO 4892-1/3, ISO 11507, ISO 11895
• EN 927-6, EN 12224
• SAE J2020
• JIS D 0205

This test equipment comply with above test standards (but not limited to)

Product Details:

Lenpure sulfur dioxide test Chambers can be used to test anti-corrosion ability of a material and its coating layer,and make manufacturing quality comparison on similar coating layers.It can also test corrosion resistence ability of certain products.

• Modern attractive styling
• Large double doors/Viewing windows
• Custom Sizes Available
• User-Friendly Controls
• Imported PP as corrosion resistant interior
• Comprehensive safety features
• All circuits fused or circuit breaker protected
• All wiring numbered or color coded
• Tri-color Indicator and EMO (Emergency-Off Switch) available

Application:

• Apply to: So2 Corrosion Test
• bathroom ware

This test equipment conforms to following test standards (but not limited to)

• GB T 2423.33-2005
• GB 9789-88
• GB 2423.33-89
• GB 2423.20-81
• GB 2423.19-81
• ISO 6988-1985
• IEC 60068-2-42-2003

Product Details:

Lenpure Ozone Aging Test Chamber Can be used to test rubber products with static tensile deformation, such as vulcanized rubber, thermoplastic rubber, cable insulating bush; expose the test specimens to the sealed air in the test chamber without light and with constant ozone concentration and constant temperature according to predetermined time, and then observe the cracks on test specimens’ surface and the degree of change of other properties to evaluate the rubber’s ozone aging resistance properties.

Features: 

PID programmable controller with LED touch screen display

Equipped with UV detector to detect the concentration of ozone

Designed with combination of three control systems- PLC, HMI and SOC

Incorporated with protection module for safety voltage

Franch - Techmesh Solid and durable structured closed-type compressor unit

U.S ECO Consists of highly efficient low noise ozone generator

Made up of corrosion resistant 316 stainless steel body

Static & Dynamic sample holder are alternative

Tri-color Indicator and EMO (Emergency-off Switch) available

Application:

Apply to: Ozone Aging Test

Rubber Products, Leather, Canvas

Standard:

ASTM D 1171, ASTM D 1149

DIN/EN 27326, DIN 53509

ISO 1431, ISO 10960

JIS K-6259

This test equipment comply with above test standards (but not limited to)

Product Details:

Lenpure Photovoltaic Module UV Aging Chamber is mainly applied in the environment where (specimen) photovoltaic modules are exposed to UV irradiation. It is for testing the modules UV resistance capability. This product is suitable for assessing the UV resistance ability of persistence composite materials and protective materials.

Features:

• Black Panel Temperature (BPT) Control
• With irradiance monitor function
• Import Q-Lab air-cooled UV-A/B lamp, more economical, more efficient and easier to maintain. Lamp life of 1800 hours
• Door Safety and Over-temperature Shutoff
• The irradiance control system continuously monitors and controls the output of the light, which ensures accurate exposure and repeatable test results
• Allows the user to simultaneously control and monitor relative humidity, blackboard temperature and air temperature in the box
• All circuits fused or circuit breaker protected, overload protection
• CE Compliance and UL & CSA Certified
• Tri-color Indicator and EMO(Emergency-off Switch) available.

Application:

• Apply to: UV-resistant test
• PV Module, Solar Panel

• GB/T 19394
• GB/T 2423.24
• This test equipment comply with above test standards (but not limited to)