Auto Tensile Tester

Product Details:

XLW (EC) Auto Tensile Tester can be used to measure tensile, peeling, deformation, tearing, heat sealing, adhesive, puncture force, opening force and low speed unwrapping force as well as other performance of plastic films, composite materials, soft package materials, plastic flexible tube, adhesives, adhesive tape, label stickers, medical plasters, release paper, protection films, combined caps, aluminium foil, diaphragm, back sheets, non-woven fabrics, rubber, paper, etc.

Features: 
Professional Technology:

Better than 0.5% of full scale effectively ensures accurate test results

Support bidirectional testing modes including stretching and compression and test speed could be adjusted freely

8 independent test modes are available, including tensile strength, peeling force, tearing force, heat sealing and other performance test.

Different test range of load cells and 7 distinct test speeds to meet different test requirements

Pneumatic clamping system provides the even clamping force for specimen to ensure the accuracy of test results

Intelligent designs of over-travel protection, overload protect, and automatic position reset for safe test operation

Professional operating software support statistical analysis of group specimens, and export test results in different units

Support LystemTM Lab Data Sharing System for uniform and systematic management of test results and test reports

High-end:
XLW (EC) utilizes Labthink's latest embedded computer system, with better performance than traditional single chip one.

Embedded computer control system integrates control software with the instruments together

Professional control system provides safer and more reliable data management as well as test operation

The instrument can be easily operated by a mouse, a keyboard, and a monitor, without requiring a PC.

The instrument is equipped with four USB ports and dual internet ports for convenient data transmission.

Benefits:

Tests can be quickly started

Compression force can be detected

Easy operation

Broad applications

More convenient and intelligent

Application:

Shearing Test

Test of Tensile Strength and Elongation Rate

Test of Tensile Strength at Break

Tear Resistance Test

Heatseal Strength Test

90 Degree Peel Test

180 Degree Peel Test

Tensile Strength Test at Defined Elongation

Standards:

This instrument conforms to multiple standards including: ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590, QB/T 2358, QB/T 1130

Product Details:

XLW (PC) Auto Tensile Tester can be used to determine physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tapes, and adhesive bandage (plaster) etc.

Features:

XLW (PC) Auto tensile Tester is professionally applicable to the determination of force properties of various flexible packaging materials, with high precision (0.5% of full scale) and multiple test ranges. The instrument is designed with 7 independent test modes and could perform tests at seven different test speeds to meet various test conditions. Intelligent software facilitates to operate the instrument and provides data analysis and comparison functions.

• 0.5% of full scale effectively ensures accurate test results
• 7 independent test modes are available, including tensile strength, peeling force, tearing force and other force properties of flexible packages
• 1000mm extra-long stroke satisfies the test needs of various materials with extreme elongation rate
• Different test range of load cells and 7distinct test speeds to meet different test requirements
• The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display
• Intelligent designs of over-travel protection, overload protect, automatic position reset and power failure memory for safe test operation
• Professional operating software support statistical analysis of group specimens, superposition analysis of test curves and historical data comparison functions
• Supports Lystem^TM Lab Data Sharing System for uniform management of test results and test reports

XLW (PC) Auto tensile Tester is professionally applicable to the determination of force properties of various flexible packaging materials, with high precision (0.5% of full scale) and multiple test ranges. The instrument is designed with 7 independent test modes and could perform tests at seven different test speeds to meet various test conditions. Intelligent software facilitates to operate the instrument and provides data analysis and comparison functions.

• 0.5% of full scale effectively ensures accurate test results
• 7 independent test modes are available, including tensile strength, peeling force, tearing force and other force properties of flexible packages
• 1000mm extra-long stroke satisfies the test needs of various materials with extreme elongation rate
• Different test range of load cells and 7distinct test speeds to meet different test requirements
• The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display
• Intelligent designs of over-travel protection, overload protect, automatic position reset and power failure memory for safe test operation
• Professional operating software support statistical analysis of group specimens, superposition analysis of test curves and historical data comparison functions
• Supports Lystem^TM Lab Data Sharing System for uniform management of test results and test reports

Benefits:

• Tests can be quickly started
• Broad applications
• More applications for elongation test
• Budget saving

Application:

• Tensile Property
• Test of Tensile Strength and Elongation Rate
• Test of Tensile Strength at Break
• Tear Resistance Test
• Heat seal Strength Test
• 90/180 Deg. Peel Test

Standards:

• National and International standards as follows: ISO 37, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T4850-2002, GB/T12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792

Product Details:

XLW Auto Tensile Tester is applicable to the determination of physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tapes, adhesive bandage (plaster), release paper, protective films, flip off cap, foil, diaphragm, back sheet, non-woven, rubber, and paper fiber, etc.

Features:

• 1% of full scale effectively ensures the accuracy of test results
• 7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packages
• Different ranges of load cells and 7 distinct test speeds to meet different test requirements
• The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display
• Intelligent designs of over-travel protection, overload protection, automatic position reset and power failure memory for safe test operation
• Professional operating software supports statistical analysis of group specimens, superposition analysis of test curves and historical data comparison functions as well as multi-functions of parameter setting, printing, inquiry, clear and calibration, etc
• Equipped with RS232 port and micro printer port which is convenient to the data transmission and PC connection
• Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Application:

• Shearing Test
• Test of Tensile Strength and Elongation Rate
• Test of Tensile Strength at Break
• Tear Resistance Test
• Heat Seal Strength Test
• 90 Degree Peel Test
• 180 Degree Peel Test

Standards:

• This instrument conforms to various national and international standards as follows: ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113, QB/T 2358, QB/T 1130, GB 8808, GB/T1040.1-2006, GB/T1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590

Product Details:

XLW (M) Auto Tensile Tester is designed for the test of physical mechanical properties of plastic films, laminated materials, flexible packaging materials, plastic flexible tube, adhesives, adhesive tapes, pressure sensitive tapes, and adhesive bandage(plaster) etc.

Features:

• 1% of full scale effectively ensures accurate test results
• 7 independent test modes are available, including tensile strength, peeling force, tearing force, heat seal strength and other force properties of flexible packages
• Specimen is mounted tightly with pneumatic specimen clamp to ensure the accuracy of test results
• Different ranges of load cells and 7 distinct test speeds to meet different test requirements
• The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display
• Intelligent designs of over-travel protection, overload protection, automatic position reset and power failure memory for safe test operation
• Equipped with RS232 port and micro printer port which is convenient to the data transmission and PC connection
• Professional operating software support statistical analysis of group specimens, superposition analysis of test curves and historical data comparison functions as well as multi-functions of parameter setting, printing, inquiry, clear and calibration, etc.
• Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Application:

• Shearing Test
• Test of Tensile Strength and Elongation Rate
• Test of Tensile Strength at Break
• Tear Resistance Test
• Heat Seal Strength Test
• 90 Degree Peel Test
• 180 Degree Peel Test

Standards:

• This instrument conforms to various national and international standards as follows:ISO 37, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, JIS P8113, QB/T 2358, QB/T 1130, GB 8808, GB/T1040.1-2006, GB/T1040.2-2006, GB/T 1040.3-2006, GB/T1040.4-2006, GB/T1040.5-2008, GB/T4850-2002, GB/T12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB/T 17590

Product Details:

XLW (B) Auto Tensile Tester can be used to measure physical mechanical properties of plastic films, laminated materials, adhesives, adhesive tapes, adhesive bandage (plaster), release paper, protective films, leather, rubber and paper fiber, etc. It can perform test items of tensile, peeling, deformation, tearing, heat seal, adhesive, and open force, etc.

Features:

• 1% of full scale effectively ensures the accuracy of test results
• 2 independent test modes are available, including tensile strength and peeling force to meet the distinct requirements of users
• 3 kinds of testing data provided for each test i.e. Maximum Value, Minimum Value and Average Value. Group data analysis is also available
• Elongation rate can be easily obtained by the precise ruler
• Different test range of load cells and 7 distinct test speeds to meet different test requirements
• The instrument is controlled by micro-computer with menu interface, PVC operation panel and large LCD display
• Intelligent designs of over-travel protection, overload protection, automatic position reset and error alert for safe test operation
• Equipped with RS232 port and micro printer port which is convenient to the data transmission and PC connection
• Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Application:

• Shearing Test
• Test of Tensile Strength and Elongation Rate
• Test of Tensile Strength at Break
• Tear Resistance Test
• Heat Seal Strength Test
• 90 Degree Peel Test
• 180 Degree Peel Test

Standards:

• This instrument conforms to various national and international standards as follows: GB/T 4850-2002, GB8808, GB/T 1040.3-2006, GB/T17200, GB/T2790, GB/T2791, GB/T2792, QB/T2358

Product Details:

MEGA 1510 Universal Testing Machine is professionally designed for the determination of mechanical properties including tensile strength, peel strength, tear strength, heat seal strength, adhesiveness and bending performance of plastic films, composite films, flexible packaging materials, adhesive tapes, rubber and paper, etc.

Features: 
Professional Technology:

• Double-column ball screw driving mechanism ensures high precision and steady working of the instrument
• Multiple testing modes are available including tensile strength, deformation, peeling, tearing and compression resistance, etc. which can meet the testing demands of the customers
• Load cells with different test ranges and stepless speed change from 1 to 500mm/min can meet the requirements for various testing conditions
• The embedded computer controller system, with membrane switch is convenient for instrument operation
• Compact and integrated design of the instrument can meet the requirements for various operating environments
• Multi-level over-travel protection, overload protect, automatic position reset and intelligent error alerts for safe test operation
• Embedded computer controlled system effectively guarantees the system security and the reliability of data management as well as test operation
• The instrument can be operated with one monitor, one mouse and one keyboard, not requiring a computer
• The system is equipped with four USB ports and two net connection interfaces, which is convenient to data transmission
• Professional operating software supports superposition analysis of test curves of group specimens and statistical analysis of maximum, minimum, average and standard deviation of test results

Application:

• Tensile Test
• Test of Tensile Strength and Elongation Rate
• Test of Tensile Strength at Break
• Tear Resistance Test
• Heat Seal Strength Test
• 90 Degree Peel Test
• 180 Degree Peel Test
• Compression Resistance Test

Standards:

• MEGA 1510 Universal Testing Machine conforms to the following standards: ISO 37, ASTM E4, ASTM D882, ASTM D 1938, ASTM D333, ASTM F88, ASTM F904, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB 14232.1-2004, GB 15811-2001, GB/T 1962.1-2001, GB 2637-1995, GB 15810-2001, QB/T 2358, QB/T 1130 , JIS P8113, YY0613-2007, YBB00042005, YBB00112004

Product Details:

MED-01 Medical Packaging Tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of full scale) and multiple test ranges.

Features:
Professional:

MED-01 Medical Packaging Tester is professionally applicable to the determination of force properties of various medical packaging materials, with high precision (better than 0.5% of full scale) and multiple test ranges. The instrument is designed with 16 independent test modes and bidirectional test mode of stretching and compression, which can meet various test requirements.

• Better than 0.5% of full scale effectively ensures accurate test results
• 16 independent test modes are available, including compression force, tensile strength, and peel strength of medical appliances and foams
• Professional pressure sensor monitors the internal pressure change during the test of force properties
• The system supports bidirectional test mode of stretching and compression, and 6 test speed can be freely selected based on user requirements
• Intelligent designs of over-travel protection, overload protection, and automatic position reset for safe test operation

Intelligent:

This instrument utilizes Labthink's latest embedded computer control system and operating software, with user-friendly operating interface and intelligent data management. It also supports Lystem^TMLab Data Sharing System, which ensures uniform management of test results and test reports.

• Embedded computer control system provides safer and more reliable data management as well as test operation
• The system can be easily operated by a standard monitor, a mouse and a keyboard; without requiring a PC
• The system is equipped with four USB ports and dual Internet ports for convenient input, output and data transfer
• Status monitoring and intelligent reminding of sensor calibration ensure instrument in the best working condition
• Historical data back up and management functions for diversified data analysis
• The system uses the high performance processor core and large storage space, which can conduct data comparison and analysis for 50 parallel tests at the same time
• Multi-level account control for better data management and protection
• Embedded help document for user viewing at any time
• Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Application:

• Tensile Test
• Puncture Test of Rubber Closures
• Test of Tensile Strength and Elongation Rate
• Break Test of Ampoule Bottles
• Test of Tensile Strength at Break
• Sliding Resistance Test of Hypodermic Syringe
• Tear Resistance Test
• Seal Performance Test of Hypodermic Syringe
• Heatseal Strength Test
• Puncture Test of Hypodermic Needle
• 90 Degree Peel Test
• Fastness Performance Test of Hypodermic Needle and Needle Hub
• 180 Degree Peel Test
• Fastness Performance Test of Hypodermic Needle Cap and Needle Hub
• Compression Test of Plastic Blood Bags

Standards:

• This test instrument conforms to the following standards: ISO 37, GB 8808, GB/T 1040.1-2006, GB/T 1040.2-2006, GB/T 1040.3-2006, GB/T 1040.4-2006, GB/T 1040.5-2008, GB/T 4850-2002, GB/T 12914-2008, GB/T 17200, GB/T 16578.1-2008, GB/T 7122, GB/T 2790, GB/T 2791, GB/T 2792, GB14232.1-2004, GB15811-2001, GB/T1962.1-2001, GB2637-1995, GB15810-2001, ASTM E4, ASTM D882, ASTM D1938, ASTM D3330, ASTM F88, ASTM F904, QB/T 2358, QB/T 1130, JIS P8113, YY0613-2007, YBB00042002, YBB00112004

Product Details:

FPT-F1 Friction/Peel Tester can be used to measure coefficient of static and kinetic friction of plastic films, sheets, foils, paper, cardboard, PP woven bags, fabric( fabiric style test), metal-plastic composite strip/belt for communication cable, convey belt and textiles, as well as peel strength test of adhesive laminated products, medical adhesive bandage, release paper, protection films, etc.

Features:

• 2 testing modes are available in this instrument including coefficient of friction test and 180 peel test
• 7 test speeds and 3 test ranges could be selected as required
• This instrument conforms to multiple standards of ISO, AS^TM and GB and the user could select testing methods as required
• Wide range and high-precision of automatic temperature control system to support tests at different temperatures
• This instrument is controlled by computer and micro processing unit which is convenient for user's operation
• The sliding plane and the sled are treated by degaussing and remanence detection which effectively reduce the system errors
• Professional operating software supports superposition analysis of test curves
• Equipped with RS232 port which is convenient to the data transmission and PC connection
• Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Benefits:

• Multi-tasking
• Versatile applications
• Good accuracy

Application:

• Plastic Films and Sheets: Coefficient of static and dynamic friction tests of plastic films and sheets
• Paper and Paperboard: Coefficient of static and dynamic friction tests of paper and paperboard
• Textiles, Non-woven Fabrics and Woven Bags: Coefficient of static and dynamic friction tests of textiles, non-woven fabrics and woven bags
• Rubber: Coefficient of static and dynamic friction tests of rubber products
• Aluminum Foils and Aluminum Foil Composite Films: Coefficient of static and dynamic friction tests of aluminum foils, aluminum foil composite films and other metal products
• Printing Matters: Coefficient of static and dynamic friction tests of printing matters

Standards:

• This instrument conforms to various national and international standards: ISO 8295, ISO 8510-2, ASTM D1894, ASTM D4917, ASTM D3330, TAPPI T816, TAPPI T549, GB 10006, GB/T 2790, GB/T 2791, GB/T 2792

Product Details:

MXD-01 Coefficient of Friction Tester can be used for static and kinetic coefficient of friction tests to plastic films, sheets, rubber, paper, PP woven bags, fabric (fabric styles test), metal-plastic composite strip/belt for communication cable, conveyor belt, wood, coating, brake pads, windshield wiper, shoe material, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.

Features:

• Static and kinetic coefficients of friction can be tested simultaneously
• The functions of automatic delay timing and automatic COF zeroing ensure enough touching time between tested specimens
• The sliding plane and the sled are treated by degaussing and remanence detection which effectively reduce the system errors
• The instrument is controlled by micro-computer with LCD, PVC operation panel and menu interface, which is convenient for customers to test or view the test data
• Top quality parts and components made by world famous brands are used to ensure reliable overall product performance
• Professional operating software supports the automatic judgment of smoothness status, discrete analysis of test results(confidence degree) and statistical analysis of group specimens
• Micro-printer can automatically print the test reports of single tested specimen or groups of tested specimens
• Equipped with RS232 port for convenient PC connection and data transfer
• Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Application:

• Films
• Paper and Paperboard
• Textiles, Non-woven Fabrics and Woven Bags
• Rubber
• Aluminum Foils, Aluminum Foil Composite Films, and Metal Products
• Printing Matters

Standards:

• This instrument conforms to the standard: GB 10006

Product Details:

MXD-01A Coefficient of Friction Tester is designed for static and kinetic coefficient of friction tests of plastic films, sheets, rubber, paper, PP woven bags, fabric style, metal-plastic composite strips/belts for communication cable, conveyor belts, wood, coatings, brake pads, windshield wipers, shoe materials, and tires and etc. With the material smoothness testing, users can control and adjust material quality technical indexes to meet application demands.

Features:

• Static and Kinetic coefficients of friction can be tested simultaneously
• The functions of automatic delay timing and automatic COF zeroing ensure enough touching time between tested specimens
• The sliding plane and the sled are treated by degaussing and remanence detection which effectively reduce the system errors
• The instrument is controlled by micro-computer with LCD, PVC operation panel and menu interface, which is convenient for customers to test or view the test data
• Top quality parts and components made by world famous brands are used to ensure reliable overall product performance
• Professional operating software supports the automatic judgment of smoothness status, and statistical analysis of group specimen test results
• Micro-printer can automatically print the test reports of single tested specimen or groups of tested specimens
• Equipped with RS232 port for convenient PC connection and data transfer
• Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Application:

• Films
• Paper and Paperboard
• Textiles, Non-woven Fabrics and Woven Bags
• Rubber
• Aluminum Foils, Aluminum Foil Composite Films, and Metal Products
• Printing Matters

Standards:

• This instrument conforms to the standard: ASTM D1894

Product Details:

COF-P01 Inclined Surface Coefficient of Friction Tester can be used for coefficient of friction tests for paper, cardboard, plastic films, sheets, and conveyor belt and etc. By the smoothness measurement, it can be used to adjust the open easiness of pouches, packaging speed of packing machine and other quality indexes so as to meet the application demands.

Features: 

• The instrument is professionally applicable to the determination of static coefficients of friction of specimens on the inclined surface
• The functions of freely changeable angular velocity and automatic plane reset support combinations of non-standard test conditions
• The sliding plane and the sled are treated by degaussing and remanence detection which effectively reduce the system errors
• The instrument is controlled by micro-computer with LCD, PVC operation panel and menu interface, which is convenient for customers to test or view the test data
• Equipped with micro-printer and RS232 port for convenient PC connection and data transfer
• Supports Lystem^TM Lab Data Sharing System for uniform and systematic data management

Application:

• Films: Including plastic films and sheets, e.g. PE, PP, PET, single or multi-layer composite films and other packaging materials for food and drugs
• Paper and Paperboard: Including paper and paper board, e.g. various paper and composite printing products of paper, aluminum and plastic

Standards:

• This instrument conforms to the following standards: ASTM D202, ASTM D4918, TAPPI T815